100% synthetic formulation specifically designed for low temperatures
Extremely low pour point of -40°F
Provides outstanding lubrication to highly loaded chains and sprockets with minimal power loss
Contains special rust and corrosion inhibitors
16 oz. bottles, sold each
| Regular Price: | $ 10.25 / Each |  | | Sale Price: | $ 8.99 / Each |
| |
| |
Technologically advanced blow-molding process produces a ski with unmatched characteristics
Lightest-weight ski on the replacement market today; Touring weighs 3.65 lb. and the All-Terrain weighs 4.7 lb.
Virtually unbreakable
Aggressive keel for improved steering control at all speeds, forward and reverse
Easy mounting kits fit most new and older sleds
Recommended Woody’s wear bars are listed below
Sold in pairs
| Regular Price: | $ 125.00 / Each | | | Sale Price: | $ 109.63 / Each |
| |
|
Total Control Steering (TCS) Skis
Total Control Steering (TCS) skis are the perfect combination of performance and comfort
Skis are made of super-strong UHMW, feature an exclusive dropped center keel with dual wear bar/carbide mounts
Design gives excellent high-speed performance and makes the ski turn easily at low speeds
Design eliminates the sled’s tendency to hunt from side to side during normal riding
An excellent choice for performance and trail riders
TCS skis come assembled with standard wear bars and ski handle, and are interchangeable between mounting kits so you can easily change skis
Skis and mount kits sold in pairs
Wear bars not included, must be ordered separately
TCS wear bars sold each; TCS wear bars with 4” or 6” carbide sold in pairs
Two wear bars are needed for each ski, which include necessary mounting hardware X-Calibar Skis
UHMW PE material construction
Backbone of the ski design is a 1” steep and deep keel
Design provides high levels of traction and high-performance corner carving ability
Bell nose keel keeps the center carbide cutting a fresh path to reduce darting
Measure 6.375” wide at the ski tip
Ski blades sold in pairs; include black ski loop
Must order mount kit separately
Replacement wear bars sold separately; order one wear bar per ski (mounting hardware included) NOTE: See chart for footnotes.
| Regular Price: | $ 303.95 / Each | | | Sale Price: | $ 266.56 / Each |
| |
| |
X Edge 90 style; newly designed with great features for the recreational rider; just point and go
Rounded keels on outer edge for more control in turns and less darting
Dovetailed in the back; ski has more sled-to-snow contact
6” wide front profile with 3 1/2” wide back profile
ISR approved handles
Total ski weight is 6.45 lbs. (including handle)
Sold in pairs
| Regular Price: | $ 279.95 / Each | | | Sale Price: | $ 245.52 / Each |
| |
|
Exact OEM replacements
Sold each
| Regular Price: | $ 10.95 / Each | | | Sale Price: | $ 9.60 / Each |
| |
| |
Twin keel design with high sidewalls for ultimate control in corners
Edge surface design
Powder-coated steel mounting brackets
Use two carbide wear bars per ski
Ski only; handles and brackets sold separately
Skis, handles and brackets sold each; carbide wear bars sold in packs of four
| Regular Price: | $ 37.95 / Each | | | Sale Price: | $ 33.28 / Each |
| |
|
Incorporate a wide design to accommodate all trail and mountain skis except the Simmons Gen II
Feature a unique profiled design and have a quick attachment which allows the guards to be installed easily
Poly attachment straps are non-marking and won’t mar spindles
Formed from durable HMW-PE material
Will remain in place during forward or reverse movement
| Regular Price: | $ 89.95 / Each | | | Sale Price: | $ 78.89 / Each |
| |
| |
Woody’s® carbide carries innovative features like 60° carbide inserts that are guaranteed not to come out under any conditions, Flat-Top design, rounded wear pads, full-length hardweld and bevel-cut host bar that doesn’t snag trailer edge. Superior quality, construction, performance, safety and reduced expense due to long service life – the Woody’s guarantee.
Flat-Top Runner Design
Woody’s Flat-Top design creates a larger contact area with the ski than a round host bar. The result is greater support, which means less flexing and rocking, with greater steering agility for the driver. Wear Pad Design
Most Woody’s carbide runners feature carbide wear pads with a rounded surface. The rounded surface is less likely to catch an edge on the trail or on your trailer. Ultra Series™
Designed for the most aggressive trail riding
5/8" host runner features a full 10" of 60º turning carbide
Carbide wear pads are used throughout the entire bar for longer life
For use with OEM composite ski; track studding required
Sold in pairs Executive Series™ Flat-Top
Designed for aggressive trail riders and racers
1/2” diameter host runner features a full 8” of 60° sharp edge turning carbide
1 1/2” carbide wear pads front and rear and full-length hardweld surfaces between all three carbide inserts ensure extended wear
Extra-long studs make it easy to install plastic ski skins
Track studding required
Sold in pairs Trail Blazer IV™ Flat-Top
Designed for aggressive trail riders
Excellent high-speed cornering control
1/2” host runner features 6” of 60° sharp edge turning carbide
Wear pads are a full 1 1/2” long
Full-length hardweld surfaces between all three carbide inserts provide extended wear
Extra-long studs make it easy to install plastic ski skins
Track studding recommended
Sold in pairs Extender Trail III™ Flat-Top
Woody’s most popular carbide
7/16” host bar carries 4” turning carbide that has a sharp 60° edge angle for performance cornering; 1 1/2” carbide wear pads help extend runner life
Full-length hardweld surfaces between all three carbide inserts for total wear protection
Extra-long studs make it easy to mount plastic ski skins
Sold in pairs Top-Stock™ Hard Surface Bar
A hardweld runner designed for extreme service or utility applications
1/2" host bar with a double head of hardweld increases the depth of the runner for controllability in grass racing or deep snow conditions
Not recommended to replace OEM carbide runners; not suitable for sleds with over 48 installed studs in track
1/2" thick with flat-top design extended mount studs and a rear angle cut
Sold in pairs NOTE: Some models require drilling extra holes in ski.
| Regular Price: | $ 25.95 / Each | | | Sale Price: | $ 22.76 / Each |
| |
|
High-grade carbon steel bars with full-length hard weld keel
Offer better durability than plain runners
Sold in pairs
| Regular Price: | $ 26.95 / Each | | | Sale Price: | $ 23.64 / Each |
| |
| |
The first major breakthrough in wear bar technology since the 1950s
Unique corner-carving hourglass design yields better control at speed with no increased steering effort
Better tracking on trails – hourglass wear bar shape catches snow from ski sides to make steering more positive
Average of 1’ - 2’ foot tighter turning radius in soft snow conditions
20% lighter than conventional 1/2” diameter round wear bars
Zinc-plated for corrosion resistance
Lifetime wear rate is nearly equal to current round and square wear bar types
Manufactured by Stud Boy
Designed and tested by USI
Sold in pairs SHAPER 4.5”
4 1/2” of 60° cutting carbide
Two 1 1/2” carbide wear pads SHAPER 6”
6” of 60° cutting carbide
Two 1 1/2” carbide wear pads SHAPER 7.5”
7 1/2” of 60° cutting carbide
Two 1 1/2” carbide wear pads SHAPER 9”
9” of 60° cutting carbide
Two 1 1/2” carbide wear pads
| Regular Price: | $ 74.95 / Each | | | Sale Price: | $ 65.73 / Each |
| |
|
Uses the concave side design of our original Shaper Bars with a new dual-runner design
One-piece design for light weight
Turns like a performance runner
Makes its own groove, so no darting on the trails
Eliminates dual-runner drag so no top-end loss
Self-cleaning design won’t clog with snow, ice or rocks
Won’t snag on obstacles
Extremely durable
Available in 4.5”, 6” and 9” of 60° cutting carbide
Sold each
| Regular Price: | $ 54.95 / Each | | | Sale Price: | $ 48.19 / Each |
| |
| |
Sno-Stuff has completely redone and improved bar selection to better reflect industry changes
All bars feature extended studs for convenience
All carbides use the same 7/16” bar stock with the exact same 60° controlling carbide and 1” wearpads, the only difference being the length of the controlling carbide
60° controlling carbide is physically larger and stays sharper for greater control and longevity 505 SERIES 4” 60° CONTROLLING CARBIDE
Sno-Stuff’s most popular carbide runner
4” x 60° of controlling carbide provides great steering control and longevity
1” tapered carbide wear pads front and rear provide exceptional wear resistance when compared to traditional hard surface bars 506 SERIES 6” 60° CONTROLLING CARBIDE
Sno-Stuff has increased this 7/16” bar’s controlling carbide to a full 6”
Perfect for high-performance machines and studded tracks
Two 1” carbide wear pads front and rear 507 SERIES 8” 60° CONTROLLING CARBIDE
Designed for the racing enthusiast and demanding trail rider
7/16” bar has 8” of controlling carbide and two 1” wear pads for excellent control and extreme wear resistance
| Regular Price: | $ 53.95 / Each | | | Sale Price: | $ 47.31 / Each |
| |
|
